AHD 418

Central unit for bow thruster control for fixed propellers

The AHD 418 central unit is a microprocessor-controlled device and includes all inputs and outputs required to control and monitor the power section of the bow thruster, consisting of a three-phase asynchronous engine (slip ring rotor) with attached fixed propeller. The central unit is installed on the power unit or in the control cabinet of the bow thruster. The device works together with up to 4 AHD 419 operating panels.

‍
‍

Control and monitoring module for bow thrusters with three-phase asynchronous motor
Module housing for installation on standard mounting rails in desks, consoles, control panels or control boxes
Protection class IP 20
Weight approx. 0.7 kg
24 V DC power supply +30%/-25%
Power consumption max. 0.3 A
Serial communication with up to 4 AHD 419 control units
Direct control of turnaround, level and intermediate shooters, including
Feedback check
Control of the 3 main stages (70%, 85%, 100%) and up to 6 intermediate stages
Fan control and monitoring
Monitoring motor current and motor winding temperatures
Engine oil level monitoring
Control of the contactor control voltage (circuit breaker)
100 percent level controllable lock
High load capacity of the relays to control the contactors; the use of auxiliary contactors is only necessary in exceptional cases
Integrated LED status display for all inputs and outputs, as well as the most important alarms (overcurrent and overtemperature) in the AHD 418 control unit

Keywords:

No images found.

Data sheets

Keine Dateien vorhanden.

Assembly instructions

Keine Dateien vorhanden.

Certificates

Keine Dateien vorhanden.